June 01, 2014

"Modelling roundup: A4, J50, N1, A2/2 and a few more…"


This is an absolute bumper round up of LNER modelling on a scale I've not quite done before. So bear with me…!


First up, my A4 Pacific project no.17 Silver Fox. She's nearly done!


I have posed her in front of my copy of Craig Tiley's excellent portrait of Mallard at speed on her record breaking run. Note the comparison in blue colours. Just lamp irons to add and she will be ready to roll for a date with destiny at Little Bytham later this month...


Next up, my third of four A4 Pacific projects. A Railroad Mallard was sourced and is being converted into another prototype for my A4 fleet. I am slightly miffed at Hornby though...

The previous incarnation of the Railroad A4 included the lubricator drive on the rear driving wheels. This has been removed for this generation. This would have swayed me away from the Bachmann chassis on its own, but no, this may remain a one off.

We shall see when it finished to compare with the other A4s. It too, has a new tender, in the form of a GBL 4472 corridor tender on a Hornby corridor chassis.


The original "prototype 1" has now been modified to fit on another Bachmann A4 chassis. The Railroad Scotsman chassis has been modified back to being an A1 chassis and will be seen in a future update…

This A4 is the next to be modified and will have handrails and other pieces added during the week before being primed and painted next weekend.


Next up, the excellent 3D printed J50, which I have finally done some modelling on. This comes from AJ Models, which you can find here.

It is not currently available as it is still in the testing period. However I can with confidence on the basis of this model, it will be out soon. It is stunning!


The first thing I did was lower the height of the body shell by filing down the blocks on its underside. It has been specially designed to fit the Bachmann Pannier tank chassis, and it fits perfectly.


You will notice that this Pannier tank chassis has been modified with the removal of the outside brake hangers and gear. This gives it an instantly more LNER look and is well worth doing.

In addition, I have fitted white metal buffers from Lanarkshire Models & Supplies, which were spare from two sets of their Gresley Pacific buffers. There was nothing wrong with the 3D printed buffers supplied, I hasten to add, but the casting of these group standard buffers was exquisite and - well - waste not want not!


The buffers fitted to the J50 above come in a pair with the Spencer type shown above on my Graeme King resin conversion of a Bachmann Peppercorn A2.

This buffer type has been difficult to obtain for some time and it is something of a relief to finally find a supply, and of a very good quality at that! The other set have gone to my other Thompson Pacific conversion, 60508 Duke of Rothesay.


At the rear end, I've finished lining out the tender frames and started on the cab. I first started lining this locomotive out three years ago and am determined to finish it over the summer! The locomotive will become 60506 Wolf of Badenoch.


As you can see, the buffers fit well and look the part. Some black paint and some metallic paint for the buffer heads and it'll nearly be finished at the front end. The lining out and a coupling to finish.


Finally, the other 3D printed locomotive and project from AJ models I have been working on, the Ivatt N1. Now finished physically with coal rails and painted in a plain black livery, it is currently waiting on some transfers before I move to weathering.


However I couldn't resist posing it with the coaches it'll be pulling on my new layout, a pair of Gresley suburban coaches. It really does look brilliant and I have to point out that this model IS now available and can be made to fit the Hornby/Dapol/Replica N2 chassis very easily.

Please, if you are after an Ivatt N1, buy this 3D printed kit (it really is the easiest, quickest way to get an N1 and it is the best you can buy. Honestly) and support another excellent part of our cottage industries.

That's it for the moment, my next modelling update will show you some baseboards…yes, a new layout is finally being built and I am very excited about it. I will put pictures up once track is permanently fitted and some scenery done. Not long now as it happens…

Until next time!

April 21, 2014

"Some obligatory A4 modelling and the Thompson B3/3 re-emerges"


I am fast approaching the finish line with no.17 Silver Fox, with the welcome addition of Fox Transfers excellent etched numerals and lettering for LNER no.17.


 Yes, the numbers are off-centre. I had to check and double check this, but this is accurate for no.17 Silver Fox on this side only, in a photograph dated 1947. Since I want my fleet of A4s to be a mixture of LNER and British Railways branding, I elected for this combination for prototype 1 to show off the modelling to its best advantage.


The eagle eyed amongst you will note that this is not the correct tender for no.17, that having a 1935 bow ended, streamlined corridor tender and not one of the original 1928 stock (which this tender is). I have elected to leave the top half above the beading blue for the time being until such a time I can source, paint and finish a 1935 type tender for no.17.


Last things to do include adding lamp irons (always a pain and always left until last), adding the coupling, cab spectacle etches, then weathering and sealing with Johnson's Klear. I hope to have all of these done within the month, and also finish the Hornby chassis prototype 2.

Though I must confess, I have almost made my mind up on which chassis I am going to standardise on. It is increasingly looking like being the Bachmann type, it being heavier, more powerful, smoother and with the die cast cartazzi and lower firebox sides, less of a pain to mount these cheap GBL bodies on.


Now onto the Thompson B3/3. This model has been on the boil for nearly two years now. Started in what feels like a completely different life, I've now got around to shortening the B1 chassis at the front end, cutting and re-shaping the running plate (needed to be deeper) and adding the GCR swivel hook on the buffer beam.


On the Isinglass drawings, the depth of the running plate is very similar to the B1, whereas period photographs show the depth of the running plate to be much deeper. I pondered over this for some time, before realising the pitch of the boiler matches that of the original GCR boiler, which means that the standard fittings, though still all within 13ft high, makes the B3/3 slightly taller in a lot of areas compared to Thompson's standard B1 type.


This is perhaps best seen in a side on view. The steps are the correct length and pitched at the right height, but they do not match up to the steps of the GCR tender, unsurprisingly. The handrails have been fitted to the cab - notice the handrails on the front of the cab, one way of recognising the B3/3 aside from the as yet to be modelled splashers, or the larger 6ft 9in wheels (which are Hornby Royal Scot drivers, suitably modified with new balance weights).

Also note the replacement, larger bogie wheels fitted to a Thompson L1 bogie. I am hoping once the guard irons are removed, and a set of separate fittings are attached to the front buffer beam, that the model will look much improved in this area next time out.

Until next time.

April 13, 2014

"Silver Fox"


No.17 Silver Fox has seen the light of day for the first time…Fox Transfers etches and transfers.


The red - humbrol no.20 - really comes out well in the sunlight.


Frankly I feel a bit vindicated in the choice of blue, particularly when you compare to the image below...


…which shows an A4 in a rather pleasing, and not at all dark, shade. Frankly I think it looks the part, I am sure a lot of people will disagree with me and say I've got it totally wrong, but hey, I've put my work out there and actually done some modelling, including a full repaint and a lot of bodging.

The comparison of garter blue shades taken from a photograph of Herring Gull, found here. Even accounting for the deficiencies of film of the time, are we seriously saying that the below, the Hornby shade:


…is light enough to be considered a better match than that I've used?

For my own peace of mind, I finally have an A4 Pacific which I'm pretty satisfied with in a lot of areas, unlike previous conversions. Prototype 2 using the Hornby chassis is up next and will hopefully look just as good. I do know there's a few things I will do differently though.

The Bachmann chassis does feel like the natural choice at the minute, given the ease of the conversion compared to the Hornby chassis.

Until next time.

April 11, 2014

"No.17…"


More tinkering with the GBL Gresley A4 body shells. This one, on a Bachmann chassis, has finally entered the painting and finishing stage.


The tender really does scrub up well though I will need to find a replacement spectacle glass for the tender, as it don't come with one fitted.


A bit of filling and filing was needed at the front end prior to painting blue...


…so I started on the tender instead. Note the extra access hatch added and the valances filled in and smoothed over in the corner behind the cylinders.


The next stage was a few coats of my own brand garter blue...


…painting the cab roof...


…and fitting the excellent Maygib sprung buffers.


Here's a few photographs taken outside in the sunshine.


The blue looks VERY light here but I think it will look very different when the black smokebox and the parabolic curves are added.


One thing i am very pleased with is the choice of Humbrol paint for the wheels, they look spot on. The body shell looks a very odd (if pleasing) shade of blue at the moment but I remain convinced that when the whole model is finished - weathered and all - it'll be a different story.


One random closeup of the wheels, a bit arty shall we say!

Until next time, when hopefully LNER no.17 will be revealed in all her glory. TTFN.

April 07, 2014

"A4 Conversions…again!"


It is almost an obsession. I seem to only be doing modelling updates of A4 Pacifics at the minute!


Here is prototype 1, a Great British Locomotives (GBL) body shell on the latest Bachmann A4 chassis, with a GBL 4472 corridor tender on a set of Hornby frames.


The model has had handrails, single chimney, access hatches added and the valances removed.


The primer has been applied, highlighting a number of areas to improve on before painting the locomotive blue.


I'm now feeling much happier about my project. Lots still to do (look at the buffer holes above, for instance, where I need to do more filling and sanding to get the shape I want) but it's starting to come together nicely.

Until next time.

March 27, 2014

"Valances and bath tubs…"


So a few more updates on my latest round of Gresley A4 Pacific modelling. It's definitely still in the "work in progress" stage, but it's getting there.


Using a set of my valance templates (as designed and produced for me by Peter Harvey of PH Designs), I've removed the valances for the most part. They are a bit rough and ready and will need some more filing down and cutting but the basic shape is there and gives a great indication of what still needs to be done.


The buffer beam and front end requires some thinking, particularly for how the buffers will be attached and how I will fit a few other components. You may notice that certain pieces on the valve gear have been omitted - since this is the Railroad 4472 chassis, there are parts moulded onto the body shell such as the eccentric gear bracket, that are actually part of the other valve gear available, such as the super detail A4 type. I think it's safe to say I need to buy a set of those and replace the current valve gear accordingly.


Here's a side by side comparison with my last "de-valancing kit" prototype, no.32 Gannet, lined up with what will hopefully become no.17 Silver Fox.

Oh, and just so that London Midland fans can see something related to their railway for a change - here's the latest few pics on my City of Lancaster build, using a Hornby Duchess chassis and a GBL Coronation body shell and tender.


LMS locomotives are still not my thing, but I now have a new found respect for the "upturned bathtubs" in so much that their elegance isn't fully appreciated until you start poring over drawings and studying the lines of the running plate and casing. It's actually quite handsome in all over black too, that to come another day...


Until next time.

March 22, 2014

"More updates on a few A4 models and the range of etches"


So we're fast approaching the painting stage for the body shells, and we know this because...


The tenders are starting to get there. It's a long story with the paint - involves a few Bugatti enthusiasts, some paint swatches, lots of debate about adding white to mixtures…but I had a very special paint mixed up for me to paint my A4s in. The idea behind the full repaint is to offer something closer than either Railmatch, Precision or Hornby in their shades of "Garter blue" - which I would argue was never such, and probably should have always been described as "Bugatti blue".

Anywan, here is prototype 2's non corridor streamlined tender in its blue livery, on its way to be painted.


The difference in shades of blue compared to the Hornby model is startling. The level of detail however, with handrails added, is virtually the same. Cheap knock off tender body shell suddenly looking the part!


In addition, the wheel sets have been painted using Humbrol gloss no.20, which to me looked a better match than that on the Hornby A4 models I have seen recently.


Finally, prototype 1 now has its own tender, well on its way to joining the prototype 2's tender in the paint shop.

This uses the GBL 4472's tender body shell, in conjunction with a set of spare Hornby frames (the correct type with the wing shaped rear steps). Again, the wheel sets have been painted using Humbrol gloss no.20.

This model is now likely to retain its valances as it's going to remain a solitary one off with its chassis I think.


That's it for the moment. If you haven't been invoiced for any of my A4 etches, by the way, fear not - you won't necessarily have missed out. I am working six day weeks at the minute and have had very little time to sort out the orders.


Last week I managed to get a few sent off, next Sunday I will do the same again…it's taken four months to get through a list of twenty people. I apologise profusely for the delay, unfortunately holding down a full time job (and doing more than 35 hours a week at the minute too) is taking its toll a little bit.


Next time I will go into more detail about the possibility of new etches and a few re-designs of older ones.

Goodnight!