"These are the stories we tell..."

Well, that's it ladies and gentlemen. The last copy of Tale of the Unnamed Engine left Sidcup earlier today, bound for Nova Scotia in Canada. We released the paperbacks for the first time in August 2013 and two and a bit years on we find ourselves with only our stock allocated for our stockists left. 

To say that today was a difficult day was an understatement. We did, after all, print and bind 2000* copies with help from Tony Lord of the London College of Communication, Blackheath's Binders, and many more besides.

I think I speak for myself and Dean when I say that we thoroughly enjoyed bringing this volume to print after releasing it as an eBook back in the summer of 2012. 

I'm so very grateful to everyone who bought a copy of the book. For those of you who didn't get a copy, have no fear. Email us on copleyhill@outlook.com, and if we have any left from returns or similar from our stockists, we'll be in touch.

All that is left to say, is that these has been the first story we told...and we're getting closer to the second one, day by day.

Here's some artwork Dean has been working on - the faces haven't actually been illustrated yet, the shading is the colour of the smokebox. Note also that the steam and smoke is yet to be done too, but there's so much rich detail in the picture already. I think you can guess what railway these engines come from!

Until next time.

*Actually, it was 35 boxes of 60 books each, which is 2100 copies. The overspill comes from printing, we had to make sure we had enough for 2000 books to sell! 

"No.4480 Enterprise"

A quick recap needed on the building of my Gresley Pacific fleet, given I've actually finished one of them now!

So we start with one of Hornby's newest Railroad Flying Scotsman models.

Then some modelling happens...!

Essentially the cabs, washout plugs, cylinder blocks, smokebox doors and chimneys are replaced, and smokebox superheater headers and sometimes domes are added. The domes and superheater headers can be bought from Graeme King on the LNER Encyclopaedia Forum, whereas the chimneys are spares bought from Hornby many years ago. The smokebox doors are my own resin casts of the super detail Hornby A3 smokebox door. The cylinder blocks were cheap lined out spares from eBay.

The cab replacement method can be seen best here. The front loco has the replacement cab with the shorter cut out fitted, and the one behind has the original cab with the side sheets extended. Fitting the replacement cab requires cutting the original one off, filing down the top of the boiler backhead a little bit, and several rubber bands and slow drying super glue.

Truth be told, replacing the cab altogether gives a much better, more accurate finish, as the addition to the cab side sheets doesn't hide the fact the sides don't curve in as they should do. Plus, the replacement cabs (from the cheap Great British Locomotives magazine models) have full cab glazing - very useful!

The reason for replacing the cab is simple: this gives the cab type accurate for 1946-9 era Gresley A3s, as well as the right hand drive detail that I need for all of my A3s (except for Humorist, which as you can see above was actually converted from right to left hand drive in addition to all of the detail differences added including the stovepipe double chimney.).

The modifications also include adding lamp irons, handrails, couplings, vacuum pipes, smokebox door darts and white metal buffers, and cylinder drain pipes too. The white metal buffers

The chassis gets either a repaint of the wheels, or replacement with lined Hornby alternatives and a new front bogie in many cases.

Well, I finally managed to finish one - no.4480 Enterprise. The paint is just a standard Plasticote gloss black paint, bought from B&Q.

She looks very glossy here compared to the unmodified Railroad model behind.

Very, very glossy in fact! Note that although a lot of the detail is moulded on, it does look superior to older Hornby Gresley A3 models if not quite as refined as the super detail model.

The comparison between the two models - as bought and as modified - couldn't be more marked.

Enterprise received some light weathering and some lamp irons and lamps, in addition to some real coal in the tender. The weathering was mostly brushed on with some powders, and a light touch with a fine brush on the smokebox and around the front and on the tender. Games workshops' Purity Seal spray was used to seal everything in.

Toning down the shiny paint has still left something of a metallic look to the boiler, which I like.

Although annoyingly NONE of my transfers appear to be on straight. They looked it when I put them one, and they look it in real life. New glasses needed...?

Aside from the transfers problem (which I'll deal with in due course), I've really enjoyed turning a budget model into something more accurate. It was great fun, cost me a lot less to do than buying the top detail model from Hornby, and I've another seven to do to complete my fleet. The chassis of the Railroad model is a lovely smooth runner, and the flywheel drive is excellent. The diecast cartazzi and extra weight really add to the haulage stakes too, making it better in my view than the super detail alternative if you feel like putting some effort into your modelling.

Picking the wartime livery for 4480 wasn't entirely a cop out though, as I intend for four of my fleet to be apple green, and four of them to be wartime black. 

This way I have a variety of tender and boiler types and combinations and liveries ranging from NE Black to LNER apple green and British Railways on the tender. Lots of interest for the impending model railway!

Until next time.

"Thompson Pacific fleet - another A2/3 on its way to completion"

So this update has been a long time coming! I bought a part completed conversion of a Bachmann Peppercorn A2. It was being turned into a Thompson A2/3.

I stripped the body shell of paint and sorted a few problems (such as a strange hole drilled in the firebox) and fitted several new bits sourced from Graeme King on the LNER forum.

These bits included a new front running plate section, new front frames (as evidenced above - unpainted resin), a new bracket for the cylinders (again, in unpainted resin above) and a new set of tender frames.

My own addition was a set of Bachmann V2 valve gear, carefully modified to fit the cylinders and then fitted straight onto the existing crank pin.

The result is the partially completed Sun Castle, which I am going to be lining out and then weathering over the coming weeks.

So happily, I have added another Thompson Pacific to my stud and also saved what could have been another scrap locomotive model from limbo, more or less. Sun Castle works well and the valve gear, though cruder than Graeme's excellent work on Edward Thompson, above, is now standard with my A2/2 and A2/1 builds and pretty much confirms that, as an easy way of going about a conversion, it works and works well.

Edward Thompson herself is waiting on the number "500" and an "E" before being described as completed. I am contemplating getting an LNER liveried tender to swap in though, all things considered. Watch this space...

Duke of Rothesay will be taken apart as I'm not satisfied the front is fitted on straight! Hopefully a straight forward job, we will see however...

Well, that's it for now. There's a mega review coming up and some more modelling on the 30th. Look out for a special review on MREmag too!

Until next time. I hope 2015 is treating you as well as it is treating me thus far!

"BRWS Ltd Update #3 - Of J15s, cabbages and Kings…"

Goodbye March! It's been a tough old month. I started my new job on the 23rd and I am loving the change in work stream. I have to work very hard over the next few months and really concentrate, so the change to monthly blogs is an advantage for sure!

So I started the month with a simple enough task. I had to change my Hornby J15 into something more personal to me, and one which no one else had done yet. One with a stovepipe, suitable for my layout set in 1946-49. I scoured books, magazines and online to find one...

So the most obvious change was to the chimney, which was a straight swap for an Alan Gibson turned brass stovepipe chimney. I simply removed the plastic Hornby one with pliers - surprisingly not damaging it (it can be re-used for something else I suspect - an industrial steam engine?) and glued it down onto the boiler.

The cab and tender sides were then shorn of emblem and numerals, using a glass fibre pen worked carefully with a little water.

This image is a composite of two pictures showing the difference between my J15 as bought, and modified. The stovepipe chimney is more obvious as a result. A further change to the model was the removal of the smokebox numberplate from the smokebox door, which was removed using a scalpel and a thin, edged file to finish.

The body shell and tender body were removed, and gloss black sprayed over the top. I have been using standard plasticote paints for some time with plain black models, and the reason for this may become more clear later on. I used press fix HMRS transfers for the number and lettering.

No.5398 was a Stratford based example that retained its stovepipe due to wartime austerity. I managed to find a number of pictures of this locomotive and it was clear to me it would be the only one suitable for my needs at this time.

You can see here that the lack of a stovepipe and removal of the smokebox numberplate really transforms the look of the model. But it is in weathering and adding a crew that I find Hornby's J15 really comes alive...

I used Tamiya weathering palettes to get the overall finish I wanted on the tender frames and locomotive chassis, before dry brushing a variety of Humbrol enamel paints over the top, and sealing the whole model with a few coats of Gamesworkshop's Purity Seal varnish finisher.

The result is a model which has a nice, unkempt look and will fit in nicely amongst the other models I am working on at present.

The crew is from Bachmann and have been weathered to match the locomotive. I do like the pose on this fella, watching the road ahead.

Adding a lamp indicating a K class goods train rounds things off.

I am slowly getting there with this vision of having set trains and train engines for my layout. I hope to have a lot more updates next month (I've been saying this for a while).

- - -

On an entirely different note, I notice a lot of hullabaloo on a few infamous websites regarding a certain product announced last year (which I also felt was controversial at the time). Here's a little hypothetical for you all to mull on, and bear with me whilst I explain further later on...

If a bank said to a consumer...

"That product you ordered? We're cancelling it, you won't be able to buy it from us now".
"But you can have it from an appointed representative of us, in a nice new box".

"Oh, and it'll cost £30 extra for the trouble of reordering".

 ...we would hear no end of complaints about the bank's behaviour, clamours for heads to roll, who thought that up, and a general agreement that this is not good business practice nor is it fair on the consumer.

So why do I bring up this example? Hattons announced practically the same scenario this week, via email, for their model of King George V to be manufactured by DJ Models, and for all orders they had taken to be cancelled, directing their previously potential customers to STEAM instead to buy a now more expensive product.

As a loyal Hattons customer, and looking at both sides of the story, I feel it is only right to say that I have only ever received excellent customer service from them. Delivieries, returns, and pre-orders, they have never put a foot wrong with me.

However I feel, looking from the outside in, that this could have all been handled very differently. Good customer service is looking at what might potentially inconvenience your existing customers, and being pro active in not looking to appease them but to genuinely help them in a positive and constructive manner: and where things have gone wrong, putting them back on track.

It is very interesting to note how customers, who have in some respects been let down and now have to consider their order and its new cost, are being pilloried for their disappointment in various locations. Are we no longer allowed to question the quality of customer service, just because it happens to take place in the model railway world?

I can't help but feel disappointed on two fronts here. Firstly that such a situation still happens: and asking myself would it really have broken the bank to simply ask the customers of that model at Hattons if they wished to have their order transferred to STEAM, and if they still wished to proceed at that new advertised price? It would have only taken an e-mail or an update on the Hattons website.

In my view that would have been the right and fair thing to do, rather than cancelling all the orders as they have done.

On a different (but somewhat related!) note, I can see that Hornby have put a few sound files out for their TTS fitted King, due later this year, in addition to photographs of the model rapidly taking shape.
It looks excellent, and for my money, is going to eclipse the recent Heavy Tanks and Star by some way. As well it might, being designed post "design-clever" and on the back of the recent excellent Peppercorn K1 and J15.

- - -

Oh, and one update for fans of The British Railway Stories. Book Two - Great Western Glory - is getting close to entering the artwork stage. The book is now finished and being readying for printing before being sent to Dean Walker, our artist, for illustrating.

Exciting times! I have also promised a new set of films featuring a few familiar faces…but more on that another day.

Until next time.