February 06, 2013

"61665 Leicester City: Hornby B17 conversion"


You'll recall from my recent Hornby B17 review last year that I intended to rename and renumber my own example into no.61679 Charlton Athletic. What I didn't tell you back then was that I was researching another class member: an actual B17 as opposed to a fictional one, to partner my South East London based footballer.

An example of Grimsby Town was bought from one of the box shifters for a mere £89 (for a model of this quality, it's a staggeringly good price), and the model waited its turn in the queue dutifully for a few weeks before I managed to get some modelling done last week.

It differs from the previous releases by pulling a London & North Eastern Railway (LNER) Group Standard tender: something I hope we will see in apple green one day, and being pulled by another locomotive class from Hornby. Patience is a virtue...

The new identity of the model would be another footballer, but with something of a twist. I wanted to have another of the unusual changeover liveries found at the nationalisation of the railways in 1948, or just after, and on close inspection of specific books such as The Power of the B17s and B2s, and RCTS LNER Volume 2A, I found one identity which was unusual, but also easily attainable.



I was however slightly aggrieved by British Railways' of 1949's sense of humour...

I had found four photographs of this locomotive, no.61665 Leicester City, with the branding, rather than the emblem, in this livery and on each occasion the lettering is in a different place on the tender sides, or in a larger font! I ended up picking a late September 1949 photograph for the left hand side, with 9in lettering, and an August 1949 photograph for the right hand side with the same 9in lettering. You will see the lettering is not in line with the numbers as a result.

There is a photograph of sister engine no.61660 Hull City in a similar form but looking closely I think she carries 8in lettering which is a shade smaller. You couldn't model that identity using this model as a basis though, as Hull City had a westinghouse pump fitted, and this model does not. 

I'm more or less convinced that Leicester City was the only choice possible with this model for 1949, and with the BRITISH RAILWAYS branding.



The first job was to strip away the original branding, and prepare the locomotive for its new identity. I used T-Cut straight from the bottle, applied liberally with a cotton bud, rubbing carefully over the emblem on the tender, and the numbers on the cabside, until they were completely removed.


On the advice of a friend, and in seeking a shinier finish than normal on the boiler and tender, I used a little T-Cut, rubbed in carefully using a cotton bud to selected areas, before buffing the model with a clean cotton bud afterwards.


I'm very much taken with the "T-Cut" method of transfer removal now, as all the numbers and letters were removed without problems on the last six models I have renumbered. It has also proven to polish up the boiler and tender rather nicely on this model in particular, though I must confess that I think the shine gives the BR dark green a depth it doesn't have straight out of the box. Credit must be given to Dave Smith, who has been very helpful and informative on weathering matters recently.

I must also confess to having spent many hours on his twitter feed and blog, studying his weathering techniques carefully. His models always exude a wonderfully oily, smoky air and even look like they've actually been cleaned. See one of his excellent models here.


Once the polishing stage was completed, I took to adding my transfers. They are all waterslide transfers, though the cabside numbers are from Modelmaster, and the tender branding is from Fox Transfers. 

I much prefer Fox's transfers, due to the way the film virtually disappears underneath a few coats of Johnson's Klear.


I had arrived at the halfway point, and took a bit of time to study the model more carefully. One of the things I think Hornby nailed was the smokebox saddle, which always looked rather odd to me on the tender drive version, and was that niggling reason for never buying one previously. 

Another thing they very much got right was the "face" of the model, seen below:


It was well worth waiting for Hornby to perfect this model: it's come out a right cracker! If I had one criticism, it would be that the smokebox numberplate, supplied by Modelmaster, looks right in all but colour. The brass colour really does look very odd on no.61665. I intend to put that right...



I hope Leicester City fans will appreciate the pain I went through this evening after work! 

Changing the name and colours on Hornby's footballer nameplate was much harder than I thought it would be! I think the results were worth it, and though it's a really cruel close up above, I don't think they look too bad on the finished locomotive. They are not perfect, but they are a good first attempt, and hopefully Charlton Athletic's will be better when I fit them.

Modelmaster nameplates were used, being of roughly the same size as Hornby's older model, are now a tiny bit too small for the new model. This however isn't really noticeable so long as you paint over the original nameplate prior to fitting the brass replacements.  

I used Gamesworkshops Enchanted Blue acrylic paint to paint over Grimsby Town's colours, with HMRS' LNER Loco sheet's white/black lining out used to create the two panels either side of the football motif. I then used a needle to paint some Abaddon Black from the same Gamesworkshops range to cover up the excess blue. 

The result is Leicester's colours adding a dash of colour to a dark green engine. I used Johnson's Klear to seal the paint and transfers, and left them to dry whilst I tackled the rest of the locomotive's detailing parts.



Hornby's detailing pack includes brake rigging for locomotive and tender, cylinder drain cocks, front coupling for the bufferbeam, a variety of pipes, steps for the front running plate and finally a set of guard irons (which are the wrong shape but a good effort) all to be fitted to the locomotive. I managed to get them all done in record time, partly by remembering the three hours it had taken when fitting out no.61679's detailing parts previously.


The nameplates were refitted into the running plate, a dab of glue on the back sealing them back into place.


 I had a go at repainting the front numberplate so that it was white, but it's not quite there...I may just cover the whole smokebox front with muck in the weathering stage so that the white doesn't show and be done with it!


Overall, I'm really happy with how no. 61665 has turned out thus far. It was very much worth having a go at changing the nameplates, and the new techniques I have been employing for my last few models have differently shown me the light. 


Gone will be the days of hand varnishing transfers to seal them: Johnson's Klear airbrushes really well and gives a superb finish. Gone also, are the days of using meths and cotton buds to remove numbers and emblems: T-Cut is the best thing that has happened to my modelling for some years I think!


So there you have it: no.61679 gains a sister engine, and I gain an unusually liveried locomotive from one of my favourite classes. This is likely to be the last B17 I will be buying, unless Hornby release a B17 with the group standard tender and in apple green.

It must be said however: it's one of those "must buy before you die" models and the urge to get another and add a third footballer into the stock list is very strong. I will resist, however, as the intention is to get a few more B1s, V2s and at least one more L1 to complete the intended mixed traffic and suburban stock list for Ganwick Curve and other projects.

The next stage for no.61665 is a trip back to the weathering booth, for a spot of very light weathering. I want my footballers to be clean for their football specials they will be pulling!

Until next time, thanks for reading. 

February 05, 2013

"Hornby Gresley N2: Is it an Olympian?"


I managed to get what I consider to be the bargain of the century last weekend: no less than four of Hornby's Olympic 1948 train packs, which include a partially retooled Hornby Gresley N2, and a pair of Hornby's top of the range teak models...for just £59.

£59! For a train pack with an RRP in excess of £200! It was too good to pass up. I have already decided that I will offset the cost of the train packs I bought by selling off some unneeded Bachmann Mk1s and Gresley teaks in carmine and cream livery. Going for the years 1948-50 for my next layout absolutely means going 1948-50!

I'm genuinely surprised by how nice the model is. The finish on the model is miles better than previous incarnations, particularly the numbering and lettering on the tank and bunker sides. The safety valves and whistle are not from the old model, but new items altogether, getting the shape much better than on the previous inherited tooling. The whistle in particular is a thing of beauty, proper turned metal forming the distinctive bell shape rather nicely.


The black satin finish is very pleasing too, and I was rather surprised to see that

Hornby upgraded their N2 model with a new DCC ready chassis, and have included a surprising addition of sprung buffers and a few other cosmetic changes to bring the N2 up to a reasonable standard, though it is a disappointment to note that it does not have NEM pockets, which surely should have been included in the tooling up of a new chassis?


In addition, the mechanism still protrudes into the cab. I suspect a carefully placed driver and fireman each side will make this more difficult to make out in the darkness of the cab!



Overall I'm actually very happy with it. Having got a few of these at so cheap a price with the post nationalisation teak coaches, it was well worth holding on until now to buy it.

At full RRP I don't think Hornby went far enough in their retooling to justify the high price, but in the end the model itself is more than adequate for that intended, and will probably produce a very nice model when renumbered and weathered.

On that note, why did Hornby pick that number? It's one of the Scottish region ones which didn't have condensing apparatus. Most strange!

For all its minor niggly faults, I can't help but grin when I look at Hornby's N2. One of these has been sat on my train set every year for as long as I can remember, and I was always disappointed with the running qualities. It sounded like a right bag of spanners!

This new version is sublime. Very smooth, quiet and surprisingly powerful despite being much, much lighter than the version it replaces.

Overall it's a thumbs up from me but I wish Hornby had gone just a little further with their retooling of the N2. NEM pockets for the couplings, the mechanism going further forward under the boiler, and perhaps one of their excellent standard couplings (supplied with the recent Thompson L1, B1, O1 and B17 models as standard) for the front bufferbeam.

Until next time, when I will be researching suitable numbers and trying out some more weathering techniques on this most handsome of tank locomotive designs.

February 03, 2013

"Thompson Trio: Renumbering & Weathering"



I've been working on a trio of Thompson designed locomotives for a few weeks, intending them for work both on the forthcoming layout Ganwick Curve, and another (much smaller) layout project that will overtake it by virtue of being cheaper to build.

Pictured above is Thompson O1 no.63789, which you may remember from an earlier blog post: it was being backdated to its 1949 condition and weathered on New Year's Eve in 2012.

The other two Thompson locomotive designs I've been working on, were a Thompson B1, and a Thompson L1. Both of these locomotives were, coincidentally, products of the North British Locomotive works at Polmadie, and as a result some minor cosmetic changes have had to be made to the tank engine in particular. All three models are, of course, ready to run models from the Hornby stable.

The only thing I will be waiting on are North British Locomotive works plates, which are on order from Fox Transfers. I should probably state at this time that there is no paid advertising on this blog: I just happen to buy from Fox Transfers as their service is always excellent and prompt!



The model started life as no.67772, in the exquisitely applied mixed traffic black livery, with cycling lion emblem on the tanksides.


I wanted mine to represent an earlier form, made by a different locomotive works to that portrayed (I believe the one depicted by Hornby was a Robert Stephenson & Hawthorn variant). The works plates on the front frames were removed using a little T-Cut and a cotton bud, followed by the emblems on the tank sides, which were removed in the same manner, along with the last two digits of the locomotive's number on the bunker sides.


Fox Transfers numerals and lettering were applied thereafter. They are waterslide transfers, which were carefully dried before sealing with a few coats of Johnson's Klear varnish. I use the bottom half of a numeral "5" to make the curly sixes on the bunker sides.


I repeated the procedure for the numberplate, again using Fox Transfer's numerals to change the last two digits. My intended prototype was no.67751, which can be found in Yeadon's Register, Volume 16 a few times in this form.

I do think the lettered branding changes the look of the locomotive quite a lot: it's surprising how squashed the lettering looks on the real thing in some of the photographs contained in that volume of Yeadon's Register, but equally surprising are the number of variations in livery, and variations within livery, of form (looking squarely at the front running plate and the types of works plates).

I was tempted to leave no.67751 in pristine livery. It was, after all, shown in such a form in Yeadon's Register (twice in fact) however my desire for a "working locomotive" look took over, and I went for the jugular, so to speak, with an afternoon of weathering.



I prepared the model as I normally do, by using mixes of Tamiya weathering powders on the chassis, smokebox and generally anything which would have got rusty, before mixing up a generic weathering shade using metal cote from the Humbrol range, and some trusty T-Cut and cotton buds to clean the excess off.


I very much wanted to recreate the "cleaned with a rag" look, and whilst this isn't perfect, I do think it's a step closer to the overall level of weathering I'm aiming for.


One thing I noted of the Thompson L1s in Yeadon's Register, was how clean some of the bufferbeams were in the late 40s and early 50s. It was truly bizarre as I tried to find a photograph of one with absolutely filthy buffers. In the end I gave up, and used some white spirit and a fine paintbrush to tone the weathering down, bringing out more of the red in the process.

There is one discrepancy I must mention: the North British built L1s had boilers which had a large plate just ahead of their safety valves. This is due to a different stay arrangement in the boiler, necessitating a strengthening plate. 

This prominent plate is absent on my model of no.67751 in lieu of drawings of the Thompson L1 class (on order). I intend to make this missing plate as a cast resin component from a mould, and will add it onto this model when all is ready. 

The only thing I am waiting for, as mentioned at the start of this blog entry, are the works plates which should arrive from Fox Transfers this week. They will be mounted onto the smokebox, as the North British Locomotive Works did with the Thompson L1s when built. It'll round off what is a model which I wanted to be "unique", and it will certainly be that when finished.


After finishing L1 no.67751 off, I turned my attention to B1 no.61203. This model started out in life as the standard Hornby release, 61138 for which I was stuck as to what form it should appear in for some time. Happily a friend came to my rescue with a few photographs of B1 no.61203 appearing both at King's Cross in 1949, and further afield, so no.61203 was duly written into the stocklist, and the model's number and branding changed in much the same way as that described for the L1 above.

One thing I had to change on no.61203 was the smokebox door: I required the same step as that on the L1. I created a small, destructible mould using plasticine, pushed carefully onto the smokebox step on another model, and then cast a resin copy, which was duly fitted and glued using super glue. It was carefully painted using Abaddon Black from the Gamesworkshop range, which I am warming to after discovering it works rather well as a wash.

I had a photograph of no.61203 which showed an absolutely filthy machine, complete with limescale cascading from the washout plugs and smokebox, or a vaguely clean locomotive, looking much happier.


Both showed the locomotive in this form, with "British Railways" on the tender. In the end, I went for the "mostly clean but has worked" look and I'm very happy with that!


The technique for weathering the B1 was identical, but for a touch of Gamesworkshops purity seal being applied gently to the smokebox.


So, I've now renumbered, rebranded and weathered all three of Hornby's excellent Thompson locomotive designs. Only one more Thompson O1, two Thompson B1s and three Thompson L1s to go! 

They will be the subject of another blog, as amongst the B1s there's a wonderfully unique livery variant (for which I take absolutely no credit, a chap on the LNER form discovered it), and amongst the L1s I'm doing two more and different 1948/1949 liveried variants.

Until then, onto the working week.

January 30, 2013

"Stocklist musings"


Or perhaps it should be better titled "why there's a Duchess in the midst".

I like Stanier's Duchess, or Princess Coronation class. I really do. It's always struck me as a magnificent locomotive class.

I don't, however, buy that the often repeated mantra that it was the highest echelon of British locomotive engineering. I also don't buy that it was the most powerful, or the best, express passenger steam locomotive that British Railways inherited.

The statistics for economy and reliability show without a shadow of a doubt, that Peppercorn's A1 Pacific was the best by a long way, and I say this based on years of study of the different time keepers, writers and engineers who have put pen to paper and given us the most balanced views.



Duchess of Hamilton, now streamlined, remains an 
exquisite exhibit in the National Railway Museum.

D.W. Winkworth, who remains one of the most balanced writers on the Bulleid Pacifics', was fair in his assessment of the relative worth of Britain's express passenger locomotives, giving good accounts of all the express locomotives on offer in his book, Bulleid's Pacifics.

Cecil J. Allen, who I consider to have a definite Eastern Region bias, is surprisingly circumspect and fair in his views when assessing the worth of the Duchesses, in his book British Pacific Locomotives. If only he was so circumspect and balanced when writing about Thompson's, but that's another story!

The point I am trying to make (and perhaps failing to do so) is that there is a lot written in the railway world on the magnificence of these specific locomotives. There is no doubt in my mind that they are magnificent. They are, however, like all steam locomotives, not perfect, and it was in their continued development, all the way up to a few roller bearing members of the class, that fascinates me so.

To claim that any locomotive is "perfect" is a big ask, and I do feel that the best Pacific locomotives on British Railways were the Peppercorn A1s. If you were going to ask "for all time" then I would say the Duchesses have a decent shout against the excellence of Gresley's A4 Pacifics.

It's on that basis that I find myself drawing up plans for a Duchess in my planned stocklist for Ganwick Curve. Given I am modelling a section of the East Coast Mainline, with a view to portraying trains running between 1948 and 1950, I have a reasonably good excuse for buying a Duchess.

That being, the 1948 Exchange Trials, chronicled in The Locomotive Exchanges by Cecil J. Allen. It's a terrific book, with some excellent descriptions of the runs, and the locomotives which took part, as well as some choice photographs.

I decided very early on that I wanted one of each of the Big Four's contenders to be present on the layout. This meant modelling A4 Pacifics Seagull, Mallard (previously done) for the Eastern region, Great Western "King" King Henry VI for the Western Region, Stanier Duchess City of Bradford and Stanier Royal Scot The Queen's Westminster Riflemen for the Midland Region, and finally the Bulleid Pacific, of the Merchant Navy class Belgian Marine for the Southern region, all locomotives which worked out of King's Cross, and into Leeds Central during the exchange.

So as you can see, I've started with City of Bradford. I do have a confession to make though...I only have the tender thus far! This was a cheap second hand purchase on eBay, which has made my life a little easier. When I do manage to get the correct combination of LMS black liveried Duchess, I'll be able to swap the tenders pretty easily. At which point, the LMS one will become spare. Make me an offer if you want it!

I'll cover the full build in more detail at a later date.

For now, I'll return to my reading, and thinking of the day when Ganwick Curve has track running round it, with a black, lined red and straw yellow Duchess stomping round as a garter blue A4 Pacific hurtles past. It'll be a colourful and fun sight, I am sure!

Until next time!

January 28, 2013

"THIS IS TUGS"


I thought I'd share a few of my photographs of the TUGS handover. It was a terrific day, sadly missing a few members of the planned Trust, but we more than made up for their absence later at the pub in the evening!


Ten Cents was one of the first TUGS I laid eyes on, and I was genuinely happy to see him. That warm, fuzzy glow of nostalgia truly is alive in the TUGS models, which have struck that chord and then some with the many people commenting favourably on their salvage.


I thought this might be a decent shot. As you can see, the whistle has a face! A detail which completely passed me by for many years until I joined the Sodor Island Forums in 2008. Amazing model making, and a superb bit of good humour too!


Sunshine doesn't look very happy! It turns out that the vast majority of the names are actually self adhesive stickers or transfers. They are extremely delicate, as it happens.


"Devious man...Devious".


"But I GOT to have garbage..."


"Beat it Zorran!"


"WARRIOR!"


Who is the mysterious tugboat?

Is it Bluenose?

Is it Sea Rogue?

Who knows...


A right Burke!


Boomer or Uncle? Both as it turns out!


Zip a dee doo dah!


"You're clear Vienna, god speed!"


"Yes, Mr Cuba sir...oh no..."


He has a moustache! How did I miss this for all these years?!


Our "Thomas" connection - OJ the paddle steamer, also capable of being turned into Lakesider III!


It was Sea Rogue after all!


The detail on Zug's cabin is amazing - just look at that patch!


Members of the Trust at the handover.


Allen and Sir Ralph also get in on the proceedings later. It's the least we could do for them: for without the efforts of The British Railway Stories Ltd, helping the overall bid from The Sodor Island Forums, none of this would have been possible.

It also highlights just how big some of the models actually are...!

Until next time, goodnight!